Headlamp High/Low-Beam; Changer; Flash-To-Pass; Daytime Running - Chevrolet sonic 2016 Owner's Manual

Headlamp High/
Low-Beam Changer
3

(Headlamp High/Low-Beam

Changer) : Push the turn signal
lever away from you to turn the high
beams on.
Push the lever again or pull the
lever toward you to return to low
beams.
This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.

Flash-to-Pass

To flash the high beams, pull the
turn signal lever all the way toward
you. Then release it.

Daytime Running

Lamps (DRL)

DRL can make it easier for others to
see the front of your vehicle during
the day. Fully functional DRL are
required on all vehicles first sold in
Canada.
This indicator light turns on in the
instrument cluster when the DRL
are on.
A light sensor on top of the
instrument panel makes the DRL
work, so be sure it is not covered.
Lighting
The DRL system makes the
low-beam headlamps come on at a
reduced brightness when the
following conditions are met:
The ignition is in the ON/
RUN mode.
The exterior lamp control is
in AUTO.
The engine is running.
When the DRL are on, only the
low-beam headlamps, at a reduced
level of brightness, will be on. The
taillamps, sidemarker, instrument
panel, and other lamps will not
be on.
The headlamps automatically
change from DRL to the regular
headlamps depending on the
darkness of the surroundings. The
other lamps that come on with the
headlamps will also come on.
When it is bright enough outside,
the headlamps go off and the DRL
come on.
121