Resetting The Factory Presets; Changing Tuner’s Frequency Step - Yamaha RX-V357 Service Manual

• Resetting the factory presets

To reset all of parameters, do the following procedure.
This procedure completely resets ALL parameters, in-
cluding the SET MENU, level, assign, and tuner presets.
Note: Only the tuner's frequency step is not reset in this
procedure. (R, L models)
1 With the main unit in standby mode, hold down "STE-
REO (EFFECT)" key and press "STANDBY/ON" key.
Then PRESET is displayed.
2 Press "STEREO (EFFECT)" key to select the desired
setting.
RESET To reset the main unit to its factory presets.
CANCEL To cancel without making any changes.
3 Press "STANDBY/ON" key.
If you selected RESET, the main unit is reset its fac-
tory presets and switches to standby mode.
If you selected CANCEL, the main unit switches to
standby mode and nothing is reset.
Note: The setting you made are reflected the next
time this main unit's power is turned on.
• Changing tuner's FREQUENCY STEP (R, L models
only)
To change the tuner's frequency step, do the following
procedure.
1 With the main unit in standby mode, hold down "STE-
REO (EFFECT)" key and press "STANDBY/ON" key.
Then PRESET is displayed.
2 Press "PROGRAM " or "PROGRAM " key to select
TUNER.
3 Press "STEREO (EFFECT)" key to select the desired
setting.
AM10/FM100 or AM9/FM50
4 Press "STANDBY/ON" key.
The main unit changes to standby mode.
Note: The setting you made are reflected the next
time this main unit's power is turned on.
RX-V357/HTR-5830
13