Panasonic DMR-PWT635 Operating Instructions Manual page 20

Getting started
Settings
6
Set "Quick Start" to "On", "Off" or "Timer
Setting for Quick Start", then press [OK].
Quick Start
On
Off
Timer Setting for Quick Start
• On
It is possible to start quickly from standby
mode.
• Off
Power consumption in standby mode is
minimized. ( 96)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start
"Quick Start" is activated when the set time
comes. (If the clock has not been set, this
function is not activated at all hours.)
When "Easy Setting has been completed."
appears, Easy Setting is complete.
• Select "Yes" to proceed to "Easy Network
Setting". ( 21)
• Select "No" to finish the Easy Setting.
20
VQT4L30
To stop partway
Press [BACK/RETURN
To restart setup
6:00 23:00
1 Press [SETUP]. (
2 Select "Auto Setup" in "Tuning", then press
3 Select "Yes", then press [OK].
To display the Owner ID information on TV
1 While the unit is on, press and hold [OK], the
2 Repeatedly press [1] (right) on the remote
3 Press [OK] on the remote control.
To confirm that channels have been tuned
correctly
Refer to "Using Channel List". (
To change PIN for parental control
Refer to "PIN Entry". (
To change the region for Channel Sorting
Refer to "Channel Sorting by Region". (
• If tuning is cancelled partway through, it may not be
18)
[OK].
yellow button and the blue button on the
remote control at the same time for more than
5 seconds.
- "00 RET" is displayed on the unit's display.
control until "01 OID" is displayed on the unit's
display.
The PIN is not displayed.
possible to receive the channels. Restart setup again.
].
24)
81)
71)