Buick Acadia Manual page 94

94 Infotainment System
4. Start the pairing process on the
cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide for
information on this process.
5. Locate the device named in the
list on the cell phone. Follow the
instructions on the cell phone to
enter and confirm the PIN
provided in Step 3. After the PIN
is entered, the system prompts
you to indicate pairing is
successful. The name of the
paired device depends on the
device and how it is set up. The
radio will automatically use the
device name. The system
responds with <Phone name>
has been successfully paired
after the pairing process is
complete.
6. Repeat Steps 1 5 to pair
additional phones.
Listing All Paired and Connected
Phones
1. Select Settings from the
Home Page.
2. Select Bluetooth Device List.
Deleting a Paired Phone
1. Select Settings from the
Home Page.
2. Select Bluetooth Device List.
3. Select the phone to delete and
follow the on screen prompts.
It is recommended the radio should
also be deleted from the Bluetooth
Device List.
Connecting to a Different Phone
To link to a different phone, the new
phone must be in the vehicle and
available to be connected to the
Bluetooth system before the
process is started.
1. Select Settings from the
Home Page.
2. Select Bluetooth Device List.
3. Select the new phone to link to
and follow the on screen
prompts.
If delete is selected, the
highlighted phone will be
deleted.
Making a Call Using the Phone
Book Contacts and Call List
For cell phones that support the
phone book feature, the Bluetooth
system can use the contacts stored
on your cell phone to make calls.
See your cell phone manufacturer s
user guide or contact your wireless
provider to find out if this feature is
supported by your phone. Also see,
Pairing a New Bluetooth Device
later in this section.
When using voice recognition to call
a contact, the voice command must
match how the contact is stored in
the phone device.