Table of Contents
Advertisement
Cleaning High Gloss Surfaces
and Vehicle Information and
Radio Displays
For vehicles with high gloss
surfaces or vehicle displays, use a
microfiber cloth to wipe surfaces.
Before wiping the surface with the
microfiber cloth, use a soft bristle
brush to remove dirt that could
scratch the surface. Then use the
microfiber cloth by gently rubbing to
clean. Never use window cleaners
or solvents. Periodically hand wash
the microfiber cloth separately,
using mild soap. Do not use bleach
or fabric softener. Rinse thoroughly
and air dry before next use.
{
Caution
Do not attach a device with a
suction cup to the display. This
may cause damage and would
not be covered by the warranty.
Software Updates
The vehicle may require updates
downloaded from the GM website.
Log into the website with either a
new username and password, or an
existing OnStar.com username and
password. Periodically check the
website for software updates.
These updates can provide feature
enhancements, new features, and
support for new devices. Detailed
instructions will be provided on the
website. After the update is saved to
the USB drive, save the update to
the vehicle. The dealership may
need to be contacted to complete
the software update.
To update:
1. Place the vehicle in P (Park),
start the engine, and turn the
radio on. The engine must be
running until the update is
completed.
Infotainment System
2. Insert the USB drive into the
USB port.
3. Choose either the Update or
Dismiss screen button to
proceed.
4. The radio will search the USB
drive for software and verify the
update.
5. The radio will also show the
progress for each update.
The message Software Update
Successful will display and the
radio will restart.
After the update, Bluetooth devices
will need to be re-paired and USB
devices may need to be re-indexed.
Remove the USB drive when the
update is complete.
See the website information
following.
15
Advertisement
Table of Contents
