Table of Contents
Advertisement
34
Infotainment System
Cursor: Press to access the
Cursor menu. The arrows and other
cursor options allow navigation of
the DVD menu options. The Cursor
menu options are only available if a
DVD has a menu and when the
vehicle is in P (Park).
Audio: Press to cycle through the
audio options if available on disc.
An example of this would be to
press Audio to change between
surround sound or stereo sound.
Subtitle: Press to cycle through the
available subtitle options.
Viewing Mode: Press to change
the viewing mode of the video
screen. The options are Wide, Full,
and Zoom.
Brightness: Press
or + to adjust
the brightness of a video, if it is
active.
Search: Press to perform a
numbered title or chapter search.
Angle: Press to display the viewing
angle of the DVD, depending on the
DVD, while the DVD is playing.
Continue pressing to cycle through
the viewing angles.
Error Messages
If Disc Error displays and/or the disc
comes out, it could be for one of the
following reasons:
The disc has an invalid or
unknown format.
The disc is very hot. Try the disc
again when the temperature
returns to normal.
The road is very rough. Try the
disc again when the road is
smoother.
The disc is dirty, scratched, wet,
or upside down.
The air is very humid. Try the
disc again later.
There was a problem while
burning the disc.
The label is caught in the DVD
player.
If the CD/DVD is not playing
correctly, for any other reason, try a
known good CD/DVD.
If any error continues, contact your
dealer.
MP3
Playing an MP3 CD
To play an MP3 CD, follow the
same instructions as Playing an
Audio CD.
The following guidelines must be
met when creating an MP3 disc,
otherwise the CD might not play:
Sampling rate: 16 kHz,
22.05 kHz, 24 kHz, 32 kHz,
44.1 kHz, and 48 kHz.
Bit rates supported: 8, 16, 24,
32, 40, 48, 56, 64, 80, 96, 112,
128, 144, 160, 192, 224, 256,
and 320 kbps.
Advertisement
Table of Contents
