Introduction; Key Features Overview - RCA VR705HF User Manual

Introduction

Key Features Overview

Your VCR is equipped with features that will add to your recording and viewing experience. The
following information summarizes a few of these features. Chapter 4 provides more information
about the rest of the VCR's features and how to use them.
ON•OFF
REVERSE
RECORD
INFO
MUTE
CLEAR
1
4
7
Rec Ch 36
Record Length 1:30
Press REC to set length
TIMER RECORDINGS
1>Create a New Program
2 Review Existing Progs.
0 Exit
Universal Remote Control
TV VCR
PLAY FORWARD
Description: The VCR's remote control can operate most RCA, GE, and Proscan
STOP PAUSE
SEARCH
TVs with no additional steps and can control many other remote-controllable
GO BACK
devices with just a few programming steps.
SPEED
MENU
2 3
5 6
8 9
0 Requirements: Point the remote control at the active device to see if it can be
TRACKING F.ADV
operated. If necessary, program the remote control following the steps listed in
this manual's "Working with the Remote Control" chapter.
Express Recording (XPR)
Description: XPR quickly records the remaining portion of a program already
in progress. XPR is a great way to capture the end of a sporting event that has
run into overtime or a live broadcast that runs long.
Requirements: Repeatedly press the Record button on the remote control or
the VCR front panel to add 30-minute increments of time to record.
Timer Recordings
Description: Your VCR allows you to program up to eight different future
broadcasts to be recorded. You can catch a one-time, daily, or weekly broadcast
to record.
Requirements: The VCR's clock must be set correctly. A tape with its safety tab
in place and enough tape to record a program must be inserted into the VCR.
For a cable box or satellite receiver, turn it on and tune it to the channel you
want to record before the recording is to begin.
Commercial Scan
Description: The purpose of Commercial Scan is to assist you in searching
forward on a tape through a block of commercials.
Requirements: A Commercial Scan is performed in 30-second units. Each
press of the remote control's SEARCH button adds an additional 30-seconds, up
to a maximum of 5 minutes (10 total presses of the SEARCH button). If you
press the SEARCH button and the timer is within the 4:30-5:00 range, then the
timer will be set to 5:00.
Introduction
1