Nikon D5 User Manual page 267

❚❚ Setup Menu Options
The Location data item in the setup menu contains the options
listed below.
• Standby timer: Choose whether or not the standby timer is
enabled when a GPS unit is attached.
Option
Standby timer enabled. The timer expires automatically if
no operations are performed for the period specified in
Custom Setting c2 (Standby timer, 0 301), reducing the
drain on the battery. If a GP-1 or GP-1A unit is connected,
Enable
the unit will remain active for a set period after the timer
expires; to allow the camera time to acquire location data,
the delay is extended by up to one minute after exposure
meters are activated or the camera is turned on.
Standby timer disabled, ensuring uninterrupted recording
Disable
of location data.
• Position: This item is only available if the GPS device is connected,
when it displays the current latitude, longitude, altitude,
Coordinated Universal Time (UTC), and heading (if supported) as
reported by the GPS device.
• Set clock from satellite: Select Yes to synchronize the camera clock
with the time reported by the GPS device.
Description
t
245