Nikon D5 User Manual page 101

A
During Shooting
During shooting, Q will flash and the time-
lapse recording indicator will be displayed in the
top control panel. The time remaining (in hours
and minutes) appears in the shutter-speed
display immediately before each frame is
recorded. At other times, the time remaining can be viewed by pressing
the shutter-release button halfway. Regardless of the option selected
for Custom Setting c2 (Standby timer, 0 301), the standby timer will
not expire during shooting.
To view current time-lapse movie settings or end
shooting (0 77), press the G button between
shots. While shooting is in progress, the time-
lapse movie menu will show exposure
smoothing, the interval, and the time remaining.
These settings can not be changed while
shooting is in progress, nor can pictures be
played back or other menu settings adjusted.
A
Image Review
The K button can not be used to view pictures while shooting is in
progress, but the current frame will be displayed for a few seconds after
each shot if On is selected for Image review in the playback menu
(0 288). Other playback operations can not be performed while the
frame is displayed.
A
Release Mode
Regardless of the release mode selected, the camera will take one shot
at each interval. The self-timer can not be used.
A
See Also
The Beep option in the setup menu controls whether a beep sounds
when shooting is complete (0 310).
y
79