Setting A Screen Saver Image; Setting Display Brightness; Adjusting The Backlight; Conserving Battery Power - Motorola MOTORAZR MOTORAZRTM User Manual

Motorola cell phone user guide
Table of Contents

Advertisement

9. Press Back key to save wallpaper settings.
Tip: Set the resolution to the Low setting on your
camera when taking pictures to be applied as wallpaper.
Low resolution photos display best when applied as Fit-
to-Screen as wallpaper.

Setting a Screen Saver Image

Set a photo, picture, or animation as a screen
saver image.
The screen saver image displays when the phone is on
and no activity is detected for a specified time. An
animation repeats for 1 minute, then the first frame of
the animation displays.
Tip: Turn off the screen saver to extend battery life.
Press Menu > Settings > Personalize > Screen Saver
1. Press S to scroll to Picture.
2. Press Change key to open the picture viewer.
3. Press S up or down to scroll to a picture,
animation, or photo. Scroll to (None) to turn off the
screen saver image.
-or
Press Options > Switch Storage Device, then S
up or down to open the Storage Devices menu,
scroll to and select TRANS-T-Flash (the removable
memory card), then scroll to a picture, animation, or
photo.
4. Press Select key to select the image.
5. Press S scroll to Delay.
Note: Setting Delay to Off disables the screen
saver feature.
6. Press Change key to set the delay interval.
7. Press S to scroll to the inactivity interval that
triggers the screen saver.
PAGE 37
SETTING A SCREEN SAVER IMAGE
8. Press Select key to confirm the delay setting.
9. Press Back key to save the screen saver settings.

Setting Display Brightness

Press Menu > Settings > Initial Setup > Brightness

Adjusting the Backlight

Set the amount of time that the display and keypad
backlights remain on.
Press Menu > Settings > Initial Setup > Backlight

Conserving Battery Power

Some networks and phones include a battery save
setting to extend battery life. When this feature is
activated, your phone automatically turns off the keypad
backlight when it detects that enough ambient light
is available.
Press Menu > Settings > Initial Setup > Battery Save
SETTING UP YOUR PHONE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motorazr v3m

Table of Contents