General; System Set-Up - Kenwood TK-3202 Service Manual

TK-3202/3206
INTRODUCTION
SCOPE OF THIS MANUAL
This manual is intended for use by experienced technicians
f a m i l i a r w i t h s i m i l a r t y p e s o f c o m m e r c i a l g r a d e
communications equipment. It contains all required service
information for the equipment and is current as of the
publication date. Changes which may occur after publication
are covered by either Service Bulletins or Manual Revisions.
These are issued as required.
ORDERING REPLACEMENT PARTS
When ordering replacement parts or equipment information,
the full part identification number should be included. This
applies to all parts, components, kits, or chassis. If the part
number is not known, include the chassis or kit number of
which it is a part, and a sufficient description of the required
component for proper identification.
Unit
Model TX-RX Unit
& destination
TK-3202 K,M
X57-6890-20
TK-3206 M
TK-3202 K3
X57-6890-22
TK-3206 M3
K2,
TK-3202 X57-6890-23
M2

SYSTEM SET-UP

Merchandise received
License and frequency allocated by FCC
Choose the type of transceiver
Transceiver programming
Are you using the optional antenna?
Are you using the speaker microphone?
2
GENERAL / SYSTEM SET-UP
Frequency range Remarks
450~490MHz
IF1 : 38.85MHz
400~430MHz
LOC : 38.4MHz
470~512MHz
A personal computer (IBM PC or compatible), programming
interface (KPG-22), and programming software (KPG-87D)
are required for programming.
(The frequency, TX power HI/LOW, and signaling data are programmed
for the transceiver.)
YES
NO
YES
NO
Delivery
PERSONAL SAFETY
The following precautions are recommended for personal
safety:
DO NOT transmit until all RF connectors are verified secure
●
and any open connectors are properly terminated.
SHUT OFF and DO NOT operate this equipment near
●
electrical blasting caps or in an explosive atmosphere.
This equipment should be serviced by a qualified technician only.
●
SERVICE
This transceiver is designed for easy servicing. Refer to
the schematic diagrams, printed circuit board views, and
alignment procedures contained within.
Frequency range (MHz) RF power
TX/RX 450~490
TX/RX 450~490
TX/RX 400~430
TX/RX 400~430
TX/RX 470~512
KRA-23 or KRA-27
Optional antenna
KMC-17 or KMC-21
Speaker microphone
(Option)
Type
4.0W TK-3202 (K,M)
4.0W TK-3206 (M)
TK-3202 (K3)
4.0W
4.0W TK-3206 (M3)
4.0W TK-3202 (K2,M2)