Table of Contents
Advertisement
Tip: You can safely leave the charger
connected to the phone after charging is
complete. This will not damage the battery.
Note: When you charge the battery, the
battery level indicator in the upper right corner
of the display shows how much of the
charging process is complete. At least 1
segment of the battery level indicator must be
visible to ensure full phone functionality while
charging.
Charging from a Computer
You can charge your battery by connecting a
cable from your phone's mini-USB port to a
high-power USB port on a personal computer
(not a low-power one such as the USB port on
your keyboard or bus-powered USB hub).
Typically, USB high-power ports are located
directly on your computer.
Both your phone and the computer must be
turned on, and your computer must have the
6
Getting Started
correct software drivers installed. Cables and
software drivers are available in
Motorola Original data kits, sold separately.
Note: When your phone's battery is dead or
has a very low charge, you must use the
phone's charger to recharge the battery. You
cannot use a USB-cable connection to a
personal computer to charge a weak or dead
phone battery.
Turn On Your Phone
1 Open your phone.
2 Press and hold the
power key for 3
seconds.
The phone may
require several
seconds to power on.
Advertisement
Table of Contents
