Creating A New Network Connection Profile - Motorola Moto Q Owner's Manual

Creating a New Network Connection
Profile
Before you can use the micro-browser, you must configure the
following settings for your network connection profile. Contact
your service provider to obtain the following information, if
necessary.
Note: Actual field names and values may vary depending on the
technologies available to your service provider. Some settings
and/or options described in this section may not be available for
all phone models.
Setting
Name
Homepage
User ID
Password
APN
User ID
Password
Dial-Up Number
(required)
WAP IP 1 (required)
WAP Port 1 (required)
132
Micro-Browser
Description
profile name
default home page
user ID to access the WAP gateway
with a GPRS connection
user password to access the WAP
gateway with a GPRS connection
Access Point Name (the name of the
WAP service provider) to use with a
GPRS connection
user ID to access the WAP gateway
with a CSD connection
user password to access the WAP
gateway with a CSD connection
phone number to use to set up a CSD
(circuit-switched data) connection
primary WAP gateway IP address
primary WAP port number