Placing a Calling Card Call
Once you have stored your calling card information, recall the
information and place the call whenever you want to use your
calling card. Before your phone begins dialing, it will prompt
you for the number you want to call. Once you have entered the
number, your phone will automatically insert the number in
place of the Number Character you stored.
1. Recall
Press
Entry
where your calling card sequence is stored.
2. Enter
Press
Number
Enter the phone number you are calling. You
may enter the number manually or recall it by
location.
3. Place
Press & hold
Call
will dial the number to access your long
distance provider, then wait for your input
when it reaches the first pause.
4. Send
Press
More
of numbers when the recording prompts you.
Numbers
The phone will automatically insert the num-
ber to call at the appropriate spot in the
sequence. Press
bers until finished.
5. End
Press
a a a a
Call
again to end the call.
‰
then enter the location number
ª
. You will see: Enter Number.
a a a a
to place the call. Your phone
a a a a
ª
or press
a a a a
to send each set of num-
º
, close the phone, or press & hold
until you hear a high tone, and press
to send the next group
a a a a
51