14
Introduction to Batteries
Each battery is shipped in an uncharged state with a protective
cover on it. Before you can use your Sprint PCS Phone, you will
need to remove the cover from the battery and charge it.
Battery Covers
It is a good idea to save the protective cover to store and carry the
battery when not in use. The cover prevents objects from
touching the battery terminals, thereby reducing the risk of
injury or damage from a short circuit.
Removing the Main Battery Cover
1. Press In
Latch
2. Remove
Battery
Attaching the Main Battery Cover
1. Lower
Side
2. Click
Latch
Press in the release latch.
Rotate the batter upward and lift it out of
the cover.
2.
1.
Lower the side, opposite the release latch,
into the cover.
Drop the side with the release latch down
until the latch clicks.
1.
Release Latch
2.