Chapter 3 - About The Hardware; About The Terminal; Turn Power On; Turn Power Off - Honeywell Dolphin 70e User Manual

3
About the Hardware

About the Terminal

For more information on the Dolphin 70e, see the User's Guide for your product.

Turn Power On

To turn the terminal On, press and release the Power button

Turn Power Off

To turn the terminal Off:
1. Press and hold the Power button
2. Touch Power off.

Suspend Mode

Suspend mode automatically turns the touch screen off to save battery power when the terminal is inactive for a pro-
grammed period of time. The automatic timeout limits are adjustable from the Advanced tab located under Settings >
System > Power.
Press and release the Power button
Note: You should always place the terminal into Suspend mode before removing the battery.

Reset the Terminal

There are three types of system resets: a soft reset, a hard reset, or a factory reset. The soft and hard resets preserve all
data stored in the file system. Contact a Honeywell technical support representative for more information on how to perform
a factory reset.
A Soft Reset (Warm Boot) re-boots the device and preserves any objects created in RAM. You would perform a soft reset
when: the terminal fails to respond, after installing some software applications, or after making changes to certain system
settings, such as network cards.
A Hard Reset (Cold Boot) re-boots the terminal and closes any open applications running in RAM at the time of the reset.
To perform a Soft Reset or Hard Reset:
1. Press and hold the Power button
2. Touch Soft Reset or Hard Reset on the menu. When the reset is complete, the Home screen displays.
Note: To perform a Hard Reset if the touch screen has stopped responding, press and hold the Power button
approximately 8 seconds until the terminal starts to re-boot. When the reset is complete, the Home screen displays.
.
for approximately 4 seconds until the Options menu displays.
to toggle the terminal in or out of Suspend Mode.
approximately 4 seconds until the options menu appears.
for
3 - 1