Motorola M990 User Manual page 37

For example, if you press , your
display shows:
Figure 8: Using iTAP mode.
If you want a different word (such as Progress), continue
pressing the keypad to enter the remaining letters. If you
would like to stop at the middle of a word or navigate
between written words, press
.
Tip: Do not worry if you forget how iTAP works. In a text
entry display, you can press Options > Text Setup > Text
Tutorial to see an explanation.
Tap & Tap Extended Modes
Press in a text entry view to switch to tap mode. If you
do not see Abc1 or Abc2, press Options > Text Setup to
set Tap mode as your primary or secondary text entry mode.
To enter text in Tap mode, press a keypad key repeatedly to
cycle through the letters and number on the key. Repeat this
step to enter each letter. The Tap Extended mode works the
same way, but includes more special characters and
symbols.
Basics – 29