Table of Contents
Advertisement
Essentials
Caution: Before using the phone for the first time, read the
Important Safety and Legal Information included in this guide.
Getting Started
Initial Setup
Connect the
Main Unit
Disconnect
the Main Unit
Inserting your
SIM
Turning
On/Off
Ring Tone
Volume
Call Volume
Muting
Microphone
Key Volume
Setting Menu
View
4 – Essentials
Insert the main unit into the base connector
until it clicks into place.
Press the release button on the left side of
the main unit and pull out the device.
Attention: Never pull out the device before
the phone powered off completely (all lights
are turned off).
With your phone powered off, slide the SIM
card into the SIM card holder at the right side
of the phone until it clicks into place.
The phone powers on and off automatically
using the car's ignition sensor. For manual
operation press and hold the End key until
the display panel lights on/off.
When no call is active, press either of the
volume keys on the left side of the phone to
set the ring tone volume.
During a call, press either of the volume keys
on the left side of the phone to adjust the call
volume.
During a call, press Mute to disable the
microphone. Press Unmute to enable the
microphone.
Press
> Settings > Ring Styles >
[Style] Detail > Key Volume.
Press
> Settings > Personalize > Main
Menu > View. Select Icons or List.
Advertisement
Table of Contents
