Accessing Contacts; Creating Entries - Motorola iDEN M710 User Manual

• A number or address – Each Contacts entry must contain
a number or address. This may be any type of phone
number, Private ID, SDG list number, Talkgroup number,
email address, or IP address.
Note: You can store numbers up to 64 digits long, but
every 20 digits must be separated by a pause
or wait. See "Creating Pauses and Waits" on
page 38.
• A Speed Dial number – When you store a phone number,
it is assigned a Speed Dial number. You can accept the
default Speed Dial number or change it.
• A voice name – If you create a voice name for a number,
you can then dial that number by saying the voice name
into your phone. This icon P appears to the left of the
Contacts type icon if a voice name is assigned.

Accessing Contacts

From the main menu, select Contacts. -or-
m
. Select Contacts.
If you are on a call: Press
32

Creating Entries

A number or address and a Contacts type are required for
all Contacts entries. Other information is optional. You may
enter the information in any order by scrolling through the
entry details.
After you have entered the number or address, Contacts
type, and any other information you want, you can press
A
under Save to save the entry to Contacts. To cancel a
Contacts entry at any time, press
screen.
To create a Contacts entry:
1 To access the entry details screen: Select Contacts >
[New Contact]. -or-
From the Contacts list, press
2 If you want to assign a name to the entry: Select Name.
Enter the name. See "Entering Text" on page 60. When
o
you are finished, press
A
Tip: Press
under Browse to select a name already in
Contacts.
3 If you want to assign a ring tone or picture to the entry,
select [Ring Tone/Picture]. See "Assigning a Ring Tone
or Picture".
e
to return to the idle
m
. Select New Contact.
.