Setting Sending Options - Motorola iDEN M710 User Manual

3 Select Name.
4 Enter the name you want to appear. See "Entering Text"
on page 60. When you are finished, press
You can also edit the information in Line 1, Line 2, and
Circuit Data, but your changes are only temporary. The
next time your phone registers on the network, your actual
phone numbers and circuit data number appear again in
My Info.

Setting Sending Options

Note: This feature may not be offered by your service
provider.
Your phone can send information in My Info to other
phones that have this capability.
You can control what portion of the information in My Info
is sent and whether it is sent automatically in every Private
call or only when you choose to send it.
Information Sent
The information your phone sends always includes My
Name and Private.
Line 1, Line 2, Carrier IP, and Circuit Data may also be
sent, depending on the options provided by your service
provider and how you set your sending options.
o
.
To change which fields are sent:
1 From the main menu, select My Info.
2 Press
3 Select Send My Info Setup > Info to Send.
4 A check mark appears next to the fields that will be
sent. To add or remove the check mark, select the field.
5 When you are finished, press
Automatic Sending
To control whether your information is sent automatically:
1 From the main menu, select My Info.
2 Press
3 Select Send My Info Setup > Auto Send.
4 To set your information to be sent automatically, set this
option to On. -or-
To set your information to be sent only when you
choose to send it, set this option to Off.
m
.
A
under Done.
m
.
My Info
87