Table of Contents
Advertisement
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.
Powering On and Off
To power your phone on:
1 Open the flip.
Tip: Press the flip open button to open the flip
easily.
2 Press and hold p for 4 seconds.
Note: To avoid powering on with transmitters off,
(ability to make and receive calls and
other transmissions), do not press p for
more than 7 seconds. See "Temporarily
Turning Off Transmissions" on page 185.
As your phone connects to the network, you will
see a connecting message. When the idle screen
appears, the phone is ready to use.
To power your phone off:
1 Open the flip.
2 Press and hold p.
Activating Your Phone
The first time you power your phone on, you have
to activate your phone before using your service.
1 Install your SIM.
Pop out the SIM chip from the SIM card attached
to the Starter Kit included. Insert the SIM chip
into the SIM card holder inside the back of your
phone.
Important: Do not touch the gold-colored areas of
your SIM chip.
2 Charge your battery.
Use the included wall charger.
3 Get your numbers.
You will need these numbers to activate your
Boost
account.
TM
• SIM ID: found in the Starter Kit, this is a
15-digit number printed on the SIM chip.
• Activation Number: 14-digit number printed on
the SIM card in the Starter Kit.
Powering On and Off
7
Advertisement
Table of Contents
