Powering Up The Phone - Motorola Satellite Series Manual

Mobile.book Page 21 Wednesday, September 9, 1998 3:05 PM

Powering Up the Phone

Turn the Power On and Off
To turn your phone's power on:
1. Insert your SIM card. (See "Installing the
SIM Card" on page 20.)
2. Press and hold
off.
When you turn your phone's power on, it
performs a self test to let you know it's
operational. You may see a number of other
power-on messages (see below).
m
When the indicator disappears and the
n
appears, you are ready to start calling.
Power-On Messages
Once your phone is powered on, you may see:
Message Description
The phone is attempting to establish
communications with the satellite
Searching...
network. See "Accessing the
Network" on page 111 for more
information.
Your phone is registering with the
network. When the process is
Registering
complete, you will see
See "Accessing the Network" on
page 111 for more information.
Your phone was locked after the last
use. Enter your four-digit unlock code
Enter Phone
and press
Unlock Code
"Locking and Unlocking Your Phone"
on page 100 for more information.
Enter the four- to eight-digit SIM card
PIN provided by your service provider
Enter PIN
and press
"Protecting the SIM Card" on
page 102 for more information.
S
to turn the phone on and
Registered
ø
to proceed. See
ø
to proceed. See
Using Your Phone
.
21