Yamaha RX-V1200 Service Manual page 29

Neo:6
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Each ch, -20 dBV, volume -10 dB
Both ch, -20 dBV, volume -10 dB
Both ch, -20 dBV (reverse phase), volume -10 dB
L/C/R/RL/RC/RR signals are NEO:6 processed by CS49329 and C/RL/RC/RR signals are output through Sub DSP-
DRAM. CS49329 is selected for the MAIN L/R output. The NEO:6 mode is fixed to Cinema 6ch.
When DD/dts input is used, the signal is decoded by YSS-938 and then L/R signal is NEO:6 processed by CS49329.
When AAC input is used, the signal is muted. When NEO:6 decoding is used, the LFE signal is not output.
NEO:6 (Auto)
Analog A/D
Digital
Condition
CS49329
NEO:6
Main DSP
DIR
DD/dts/Thr
YSS938
RX-V1200/RX-V1200RDS/HTR-5490/RX-V2200
MAIN L/R CENTER REAR C
- ∞ - ∞
-5.5 dBV
- ∞ - ∞
-2.5 dBV
- ∞ - ∞ - ∞
Sub DSP
Through
4Mbit DRAM
SWFR RL/RR
- ∞ - ∞
- ∞ - ∞
- ∞
-5.5 dBV
L/R
C
RC/SW
FL/FR
RL/RR
28