Advanced Structurescan Settings - Lowrance ELITE Ti Getting Started

34

Advanced StructureScan settings

Surface clarity
Wave action, boat wakes and temperature inversions can cause on-
screen clutter near the surface.
The surface clarity option reduces surface clutter by decreasing the
sensitivity of the receiver near the surface.
Note:
Ú By default, surface clarity is set to Low, for optimal
image return and clarity.
Flipping the Structure image left/right
If required, the left/right SideScanning images can be flipped to
match the direction of the transducer installation.
Range Lines
Range lines can be added to the image to make it easier to estimate
depth (Downscan) and distance (SideScan).
Preview
You can turn off sonar history preview, have it always shown at the
top of the screen, or have it appear only when the cursor is active.
By default, the sonar history preview appears when the cursor is
active.
Recording StructureScan data
Select the Log data menu option to start and stop recording of
StructureScan data. You can save the file internally in the unit, or
save it onto a card inserted into the unit's card reader. When you
select the record option in the Advanced menu, the Record sonar
log dialog is displayed where you specify recording settings.
Recorded StructureScan data can also be uploaded to Insight
Genesis if you specify Upload to Insight Genesis in the Log Sonar
dialog.
StructureScan | ELITE Ti Getting Started