Download Print this page

Description & Intended Use; Technical Specifications; General Safety Rules - Northern Industrial Tools 123010 Owner's Manual

Advertisement

Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC., Product!
For future reference, please complete the owner's record below:
Model: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire
manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment strongly
recommends this machine is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application, DO
NOT use the machine until you have first contacted Northern Tool + Equipment to determine
if it can or should be performed on the product.
For technical questions and replacement parts, please call 1-800-222-5381.
DESCRIPTION & INTENDED USE
The Northern Industrial Airbrush Compressor #123010 Features and Functions:
· Portable & lightweight
· Low noise
· Thermally protected
· Powerful and high air flow
· Auto stop
· Pressure-adjustable
· Double switch
Switch 1: Auto stop @ 58 PSI
Switch 2: Max pressure @ 87 PSI

TECHNICAL SPECIFICATIONS

Type:
Power:
Voltage:
Maximum pressure:
Air output
Double switch:
Includes:
Connections:
Weight:
Dimensions:
Power Cord:

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
WARNING: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions or situations that could
occur. It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the operator.
WARNING: HIGH PRESSURE AIR. Bypassing, modifying or removing safety/relief
valves can cause serious injury or death. Do not bypass, modify ore remove safety/relief
valves. Do not direct air stream at body. Rusted tanks can cause explosion and sever injury
or death. Drain tank daily or after each use. Drain valve located at bottom of tank.
Purchase Date: _______________
Twin Cylinder Piston Compressor
Switch1:
Switch 2:
Manometer; pressure regulator; air filter
12" x 5-5/16" x 8" (320x135x205mm)
1 OF 5
1/3 HP
120V/60HZ
87 PSI
11.2 CFM
Auto start @ 41 PSI
Auto stop @ 58 PSI
Max pressure @ 87 PSI
1/4" NPT
12 Lbs.
6 Feet

Advertisement

loading