Universal Transceiver; Homelink ® Universal Transceiver - Tesla S Owner's Manual

About HomeLink
If Model S is equipped with the optional tech
package, you can program the HomeLink
Universal Transceiver to operate up to three
garage doors, gates, lights, and security
systems that can transmit Radio Frequency
(RF) signals.
Programming HomeLink
1. Park in front of the device you want to
program, and have the device's remote
control ready.
2. Touch Controls > Settings > HomeLink on
the touchscreen.
3. Touch Enter Name, then use the onscreen
keyboard to enter a name for your
HomeLink device.
4. Touch Create HomeLink.
5. Follow the onscreen instructions.
Once programmed, you can operate the
device by touching its corresponding
HomeLink icon on the touchscreen's status
bar. HomeLink remembers the location of
your programmed devices. When you
approach a known location, the HomeLink
control on the touchscreen automatically
drops down. When you drive away, it
disappears.
Note: For security reasons, erase your
HomeLink settings if you sell Model S.
Warning: Your device might open or
close during programming. Before
programming, make sure that the device
is clear of any people or objects.
Warning: Do not use the HomeLink
Universal Transceiver with a garage door
that does not meet federal safety
standards. A garage door opener that
cannot detect an object in its path and
then automatically stop and reverse, does
not meet these standards. Using a garage
door opener without these features
increases the risk of injury or death.
Using the Touchscreen
®
®
®
Using the Touchscreen
83