Clean The Lint Filter; Load The Dryer Properly; Getting Started - Samsung DV40J3000EW User Manual

CLEAN THE LINT FILTER
• After each load.
To shorten drying time.
To operate more energy efficiently.
_Do not dryer without the lint filter in place.
operate your
LOAD THE DRYER PROPERLY
Place only one washload in your dl'yer at a time.
®
Frame Front
FiRer
Door
In mixed loads, heavy and lightweight fabrics will dry differently. This may result in lightweight fabrics
being dry while heavy fabrics remain damp at the end of a drying cycle.
Add one or more additional similar items to your dryer when you are drying only one or two items. This
improves the tumbling action and drying efficiency.
Overloading restricts tumbling action, resulting in uneven drying as well as excessive wrinkling of some
fabrics.
GETTING STARTED
1. Load your dryer loosely- DO NOT overload.
2. Close the door.
3, Select the appropriate cycle and options for the load (Refer to "Cycle chart").
4, Press the Start/Pause button.
5, The dryer indicator light will illuminate.
®
®
When the cycle is complete, "End light" will illuminate in the display.
Pressing Power cancels the cycle and stops your dryer.
The Drying, Cooling, and Wrinkle Prevent indicator lights will illuminate during those portions of the
cycle.
ADo not place anything on top of your dryer while it is running.
WARNING
Engl sh - 24
D\r3000] [)\r40J3000E\\T USE]_.\IANUAL_DC68 03170N ENindd 24 2014/12/30 15:14:49