Car Remote Mode - Pioneer DEH-X6850BT Owner's Manual

Purpose
Delete a station
Pause/resume playback
Thumbs Up
Thumbs Down
Create a new station based on the
track currently being played
Create a new station based on the
artist currently being played
NOTE
Some functions of Pandora may not be operated from the unit.

Car Remote Mode

You can operate the unit from a car remote application installed on an iPhone/Android
device. In some cases, you can control aspects of the application, such as source
selection, pause, etc., by using the unit.
For details on what operations are available on the application, see the application's help
section.
WARNING
Do not attempt to operate the application while driving. Make sure to pull off the road and park your
vehicle in a safe location before attempting to use the controls on the application.
For iPhone users
This function is compatible with iPhones and iPod touches installed with iOS 8.0 or later.
For Android device users
This function is compatible with devices that have Android OS 4.1 or later installed and
also support Bluetooth SPP (Serial Port Profile) and AOA (Android Open Accessory) 2.0.
Making the car remote connection
1
Connect this unit with the mobile device.
• iPhone/Android device via USB (page 6)
12
En
Operation
1 When the station is selected, press and hold the
M.C. dial.
[DELETE YES] appears.
2 Press the M.C. dial.
To cancel, press /DIMMER or BAND/
step 1.
Press 4/PAUSE.
Press 1/ .
Press 2/ .
Press and hold 5/ .
Press and hold 6/ .
• Android device via Bluetooth (page 8)
2
Press the M.C. dial to display the main menu.
3
Turn the M.C. dial to select [SYSTEM], then press to confirm.
4
Turn the M.C. dial to select [APP CONN.SET], then press to confirm.
in
5
Turn the M.C. dial to select one of the below.
• Select [WIRED] for a device connected via USB.
• Select [BLUETOOTH] for an Android device connected via Bluetooth.
Proceed to step 9 if you select the USB connection for iPhone or the Bluetooth
connection.
6
Press BAND/ to display the previous menu list.
7
Turn the M.C. dial to select [ANDROID WIRED], then press to confirm.
8
Turn the M.C. dial to select [APP CONTROL] for an Android device connected via
USB.
If [ON] is selected in [P.APP AUTO ON] (page 15), the car remote application on the
Android device starts automatically, and all the steps are finished.
NOTE
If the car remote application has not been installed on your Android device yet, a message that
prompts you to install the application will appear on your Android device. Select [OFF] in [P.APP
AUTO ON] to clear the message (page 15).
9
Press SRC/OFF to select any source.
10
Press and hold the M.C. dial.
The car remote application on the mobile device starts.
Listening to music on Android
1
Press SRC/OFF to select [ANDROID].
Basic operations
Purpose
Select a track
Fast forward or reverse
Pause/resume playback
Operation
Press or .
Press and hold or .
Press 4/PAUSE.