Changing The Pin; Unblocking The Pin - Motorola i60c User Manual

Once blocked, the phone will not allow you to enter your PIN again, even after
powering the phone off and back on. If this happens, see "Unblocking the PIN"
on page 13.

Changing the PIN

NOTE: In order to change the PIN, the SIM PIN security feature must be set
to On. See "Enabling/Disabling the PIN Security Feature" on page 11
From the idle screen, press q and then press R to scroll to Settings.
1
Press C under SELECT. The Settings screen displays.
2
Press R to scroll to Security. Press C under SELECT to access the
3
Security screen.
At the Security screen, press R to scroll to New Passwords. Press C
4
under SELECT to access the New Passwords screen.
At the New Passwords screen, press R to scroll to SIM PIN and press
5
C under SELECT.
6
At the Enter Old SIM PIN Code screen, enter the current SIM PIN
and press C under OK.
NOTE: The default SIM PIN is 0000.
7
At the Enter New SIM PIN Code screen, enter a new 4- to 8-digit SIM
PIN and press C under OK.
8
At the Re-enter New SIM PIN Code screen, re-enter the new SIM PIN
to confirm, and press C under OK.

Unblocking the PIN

If you forget your PIN and unsuccessfully enter it three times, access to your
phone will be blocked.
NOTE: Before you begin, obtain the PIN Unblocking Key (PUK) code from Boost
Customer Care, then read and understand the PIN unblocking sequence.
When entering the key press sequence, each key press must occur within 5
seconds of the prior key press.
The SIM Card
13