Connecting - Teufel iTeufel Dock v3 Technical Description And Operations Manual

Connecting

Sound transmission
The jack 7 LINE OUT serves as audio
output of your iTeufel
• Connect this jack with the audio input
jack(s) of your amplifi er or TV set (e.g.
Audio In, Line In, AUX).
• A stereo cable with 2 jack plugs (3.5
mm) or with one jack plug (3.5 mm)
and 2 RCA plugs is required for the
connection.
Image transmission
The output jacks 5 COMPOSITE or 6 S-
VIDEO are available for playback of
your videos and photos.
• Connect one of the two jacks with
the corresponding input jack of your
TV set. If your TV set features both
jacks, you should preferably use the
S-VIDEO connection which provides a
slightly better image quality.
• A video RCA cable is required for the
COMPOSITE connection.
For the S-VIDEO connection you need
an S-VIDEO cable.
® Dock v3.
• Please note that no sound is trans-
ferred via both video jacks. You need
to transfer sound separately with the
jack 7 LINE OUT as described above.
Selecting the signal source
• Set the connected jack as the signal
source (source) on your amplifi er or
TV set.
Connection with iTunes
• Connect the jack 4 USB with a USB
jack of your computer.
• A cable with a USB plug of type A
and type B each is required for this.
• To synchronise your iPod/iPhone start
iTunes on your computer as usual.
Your iPod/iPhone is recognised au-
tomatically and can be synchronised
now.
Amplifi er
• iTeufel ® Dock v3
9