E-Mail.notification.(Windows.only) - Buffalo HD-QLU3R5 User Manual

E-mail Notification (Windows Only)
The RAID Utility can notify you by email when certain events occur. To configure this, follow the steps
below.
Note: The example below shows Windows 7. Your screens may look slightly different.
1
Right-click the
2
Click the [Monitoring config] tab.
3
4
Click the [Email config]tab.
5
Enter the address, account, and password of the e-mail server that is used and
specify the e-mail address of the sender and recipients.
24
HD-QLU3 User Manual
icon on the taskbar, then select [Option].
① Specify the monitoring interval for the
② Check "Receive email when error
③ Click [Config].
① Enter the address, port number, and
② To use POP before SMTP, select "Use
③ Enter the e -mail addresses of the
④ Click [Config].
device.
occurs".
The subject of the e-mail can also be entered.
Clicking [Restore default] sets "RAID Report"
as the e-mail subject.
sender address of the SMTP server.
[POP before SMTP]", then enter the
address, port number, user account,
and password of the POP server.
recipients (up to five).
Go to Next Page