SAFETY AND GENERAL
INFORMATION
IMPORTANT INFORMATION ON SAFE AND
READ THIS INFORMATION BEFORE USING
YOUR INTEGRATED MULTI-SERVICE
RF Operational Characteristics
Your radio product contains a radio frequency transmitter to convey the
information you wish to send as well as occasional automatic signals
used to sustain connection to the wireless network, and a receiver which
enables you to receive communication and connection information from
the network.
Exposure To Radio Frequency Energy
Your Motorola Radio Product is designed to comply with the following
national and international standards and guidelines regarding exposure
of human beings to radio frequency electromagnetic energy:
•
United States Federal Communications Commission, Code of Federal
Regulations; 47 CFR part 2 sub-part J
•
American National Standards Institute (ANSI) / Institute of Electrical and
Electronics Engineers (IEEE). C95. 1-1992
•
Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1999
Edition
•
National Council on Radiation Protection and Measurements (NCRP) of
the United States, Report 86, 1986
•
International Commission on Non-Ionizing Radiation Protection (ICNIRP)
1998
•
National Radiological Protection Board of the United Kingdom, 1995
•
Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to
Radiofrequency Electromagnetic Fields in the Frequency Range from 3
kHz to 300 GHz, 1999.
•
Australian Communications Authority Radiocommunications
(Electromagnetic Radiation - Human Exposure) Standard 1999 (applicable
to wireless phones only)
To assure optimal radio product performance and make sure human
exposure to radio frequency electromagnetic energy is within the
guidelines set forth in the above standards, always adhere to the
following procedures:
Safety and General Information
EFFICIENT OPERATION.
PORTABLE RADIO.
85