Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Denver IFM-90
Summary of Contents for Denver IFM-90
- Page 1 Alarm Clock Radio for iPod/iPhone Model No.: IFM-90 INSTRUCTION MANUAL...
- Page 2 CAUTION Symbol Work Definitions DANGER – Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. This symbol appears only in the most extreme situations. WARNING - Indicates a potentially hazardous situation which could result in death or serious injury. CAUTION - Indicates a potentially hazardous situation, which, if not avoided, may result in minor/ moderate injury or product/ property damage.
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Read this Instruction Manual before you attempt to connect or operate the appliance. Keep these instructions in good condition. Heed all warnings. Follow all instructions. Save this Instruction Manual for future reference. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product. -
Page 4: Preparation For Use
PREPARATION FOR USE • Carefully remove all the components from the packaging and verify that you have all the necessary components. • Remove all packing materials from the individual components. Remove any descriptive labels that may be attached to the front panel of the main unit. Do not remove any labels or stickers on the back panels of the main unit. -
Page 5: Back Panel
BACK PANEL LCD DISPLAY STANDBY/SOURCE Button VOLUME- Button VOLUME+ Button MODE Button LCD Display PLAY/PAUSE Button AUX Input TUNE/SKIP- Button DC Input TUNE/SKIP+ Button Battery Compartment MEMORY - Button FM Antenna MEMORY + Button PM Indication (For 12H set) ALARM 1 Button Time Display ALARM 2 Button iPod /AUX/FM Frequency/Date Mode... -
Page 6: Installing The Batteries
STANDBY/SOURCE Button MODE/MENU Button Remote Control ENTER Button STEREO Button ALARM ON/OFF Button SLEEP Button MUTE Button STOP Button PLAY/PAUSE Button SNOOZE Button MEMORY + Button MEMORY - Button VOLUME - Button VOLUME + Button INSTALLING THE BATTERIES Remote Control Battery The remote control requires one "CR2025 type"... -
Page 7: Backup Function
When the operation of the remote control becomes intermittent or unsatisfactory, replace the original battery with a new 3-volt lithium battery. Slide out the battery holder from the remote control case. Place one 3V CR2025 battery in the battery holder with the print face up. If the battery is placed incorrectly the remote control will not work. - Page 8 In the Standby mode, press on the top panel or MODE on the remote until the unit enters the clock set mode. ‘24H’ will flash on the display indicating that the clock is set for 24-hour cycle. Press on the top panel or the remote once to change the clock format to 12-hour cycle.
-
Page 9: Listening To Fm Radio
Wake up to iPod playback. Wake up to Buzzer. Press to confirm. The alarm can be enabled and disabled by pressing on the unit or repeatedly pressing on the remote. • will display when alarm 1 is enabled. Set Alarm 2 Press and hold on the top panel until the hour digit ‘0’... -
Page 10: Using Your Ipod/Iphone
Tune to the desired frequency as follows: Automatic Tuning Press and hold until auto tuning starts. The tuner will search the FM band until it finds a station, it will then play station. Repeat this procedure until the tuner stops on your desired station. - Page 11 In order to prevent unwanted distortion during iPod playback, it is recommended that you set the EQ in your iPod to the Off position. Go to the Main Menu in your iPod/iPhone and then select the Settings Menu, select the EQ Setting, and make sure that the EQ function is set to Off. (Main Menu > Settings Menu >...
-
Page 12: Care And Maintenance
Connect the Audio Output jacks of your auxiliary sound source (TV, VCR, DVD Player, Cassette Deck, Mini Disc player, etc.) to the AUX IN jack on the back panel of the unit. The auxiliary function will only function when the aux in jack has a suitable sound source applied via a suitable connection cable. Note: The connection cables are not included. - Page 13 PROBLEMS POSSIBLE SOLUTION Power System does not turn on, or does not Make sure the adapter plug is secure in the wall outlet and respond to the remote control. it has power. Remove batteries, pull the adapter plug out for 5 minutes then re-connect and try again.
- Page 14 iPod 4G: 20GB iPod 3G: 15GB, 30GB, 40GB iPod photo: 20GB, 30GB 10GB,15GB,20GB iPod 4G: 40GB iPod 3G: 30GB 30GB+40GB iPod photo: 40GB, 60GB 60GB iPod nano: 1GB, 2GB, 4GB nano iPod mini: 4GB, 6GB mini iPod nano 2: 2GB, 4GB, nano 2 Dust cover should be installed in the docking...
- Page 15 Additional information is available at the technical department of your city. ALL RIGHTS RESERVED COPYRIGHT DENVER ELECTRONICS A/S “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod,or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Need help?
Do you have a question about the IFM-90 and is the answer not in the manual?
Questions and answers