Transporting Storage; Preparation For Storage - Jet JGE3100 Operation Manual

transporting
Transporting
When transporting the generator, make sure that the fuel (gasoline)
should be drained from the tank.
To prevent fuel spillage due to the vibration and
impact, never transport the generator with fuel
(gasoline) in the tank. Secure the tank cap.
To avoid the risk of the gasoline flammability, never
leave the generator in an area exposed to direct
sunlight or high temperatures for a long period time.
Keep the fuel in an approved storage tank when transporting.
1. Turn the engine switch to the STOP position.
2. Drain the fuel from the tank.
3. Tighten the tank cap.
DO NOT place any heavy objects on the generator.
Select and place the generator in the proper position of the
transport vehicle so that the generator will not move or fall down.
Secure the generator if necessary.

Preparation for Storage

The following procedures should be followed prior to storage of your
generator for periods of 6 months or longer.
1. Drain fuel from fuel tank carefully by disconnecting the fuel line.
Gasoline left in the fuel tank will eventually deteriorate making en-
gine starting difficult. Add fuel stabilizer to fuel tank.
2. Remove the drain screw of the carburetor.
3. Change engine oil.
4. Check for loose bolts and screws, tighten them if necessary.
5. Clean generator thoroughly with clean cloth. NEVER USE WATER
TO CLEAN GENERATOR.
6. Pull recoil starter handle until resistance is felt, leaving handle in
that position.
7. Store generator in a well ventilated, low humidity area.
30
&
storage
WARNING
CAUTION