Troubleshooting; Troubleshooting Chart - Jet JGE3100 Operation Manual

Troubleshooting Chart

If you are experiencing a problem that is not listed in this chart, or
have checked all the possible cause listed and you are still experienc-
ing the problem, see your authorized dealer.
Problem
Engine will not start
Generator has no
output
Cause
1. Check if engine switch is off.
2. Fuel Tank empty.
3. Check to make sure generator is not
connected to an appliance.
4. Check spark plug for loose spark plug cap
5. Check spark plug for contamination.
6. Check engine oil level.
1. Check if the DC circuit breaker is
turned off.
2. Check AC receptacle and DC terminals
for loose connection.
3. Check to see if engine starting was
attempted with appliances already
connected to generator.

troubleshooting

Correction
1. Turn engine switch to the Choke
position.
2. Fill tank making sure not to overfill.
3. If connected, turn off the power switch
on the connected appliance and unplug.
4. If loose, push spark plug cap back
into place
5. Remove spark plug and clean electrode.
6. If engine oil level is low, add oil as per
instructions.
1. Depress or flip the circuit breaker into
ON position.
2. Secure connection if necessary.
3. Turn off switch on the appliance, and
disconnect cable from receptacle.
Reconnect after generator has been
started properly.
27