Table of Contents
Advertisement
Turning Your Phone On
1. Open your phone.
2. Press and hold the power
key for 3 seconds.
3. If necessary, enter
your 4-digit unlock code (the last 4 digits of your
phone number) and press the right soft key to
unlock the phone
Making a Call
1. Press keypad keys to dial the phone number.
2. Press N to make the call.
3. Press P to end the call and "hang up" the phone
when you are finished.
-or-
4. Close the flip.
Tip: You can set the phone to answer calls when you
open the flip.
To activate, press M > Settings > In-Call Setup >
Answer Options > Open To Answer.
Tip: You can set the phone to answer calls when you
open the flip. To activate, press M > Settings > In-Call
Setup > Answer Options > Open To Answer.
Answering a Call
When you receive a call, your phone rings and/or
vibrates and displays an incoming call message.
• Press the right soft key to answer a call.
-or-
• Press N.
PAGE 7
TURNING YOUR PHONE ON
• Press P to end the call and "hang up" the phone
when you are finished.
-or-
Power
Key
• Close the flip.
Adjusting Volume
Press up or down on volume
keys to:
• increase or decrease
earpiece volume during an
active call
• temporarily silence an incoming call alert
• increase or decrease the ringer volume setting when
the home screen is visible (flip must be open)
Tip: At the lowest volume setting, press the down
volume key once to switch to vibrate alert. Press it again
to switch to silent alert. Press the up volume key to cycle
back to vibrate alert, then ring alert.
Changing the Call Alert
In the home screen, press the
down volume key to switch to
lower call alert volume, then
switch to vibrate and, finally,
silent alert. Press the up
volume key to cycle back from
silent alert to vibrate and then to the lowest volume alert
volume setting.
Viewing Your Phone Number
To view your phone number from the home screen,
press M #.
While you are on a call, press M > My Tel. Numbers.
GETTING STARTED
Volume
Keys
Volume
Keys
Advertisement
Table of Contents
