Board; Jd-45 Board - Sony DPP-EX7 Service Manual

2-1-4. JD-45 Board

1. Remove the upper cabinet assembly. (Refer to Section
1-2-1.)
2. Remove one screw, then remove the JD-45 board.
3. Disconnect one harness from the connector (CN1020)
on the JD-45 board.
MD-45 board
4. Install the JD-45 board in the reverse order of steps 1
to 3.
DPP-EX7 V1
Harness
P 2x3
CN1020
JD-45 board
2-1-5. PE-45 Board
1. Remove the upper cabinet assembly. (Refer to Section
1-2-1.)
2. Remove the DK-45 board. (Refer to Section 2-1-1.)
3. Remove the paper eject guide assembly. (Refer to
Section 2-3.)
4. Remove the mechanical deck assembly. (Refer to
Section 2-4.)
5. Remove the PE-45 board in the direction indicated by
the arrow B while pushing one hook of the paper feed
frame assembly in the direction indicated by the arrow
A.
6. Disconnect one harness from the connector (CN1030)
on the PE-45 board.
Paper feed frame
assembly
Paper feed frame
assembly
A
PE-45 board
CN1030
7. Install the PE-45 board in the reverse order of steps 1
to 6.
Mechanical deck
assembly
Harness
Hook
B
2-3