Lcd Module - Sony DPP-EX7 Service Manual

14. Rotate the two roller bearings in the direction indicated
by the arrow A, then remove them.
15. Move the E capstan roller in the direction indicated by
the arrow B, then remove it in the direction indicated
by the arrow C.
Roller bearing
A
B
E capstan roller
C
16. Attach the E capstan roller in the reverse order of steps
1 to 15.
DPP-EX7 V1

2-12. LCD Module

1. Remove the upper cabinet assembly. (Refer to Section
2. Remove the LCD subassembly. (Refer to Section 1-2-
3. Remove one screw (M 2x3) and six hooks, then
Pinch roller
4. Remove the four screws (PTP 2x5), then remove the
A
Roller
bearing
LCD front
cabinet assembly
1-2-1.)
2.)
remove the LCD rear cabinet.
hinge unit.
Hooks
PTP 2x5
Hinge unit
LCD rear cabinet
Hooks
Hook
M 2x3
2-11