10
SAFETY PRECAUTIONS
CAUTION
•
Contact your seller or our
service centre once a year to
clean the internal parts of the
projector.
- If you do not clean the
projector for a long period of
time, dust will accumulate,
which may result in fire or
damage to the projector.
•
When cleaning plastic parts
such as the projector case,
unplug the power first and wipe
with a soft cloth. Do not spray
with water or wipe with a wet
cloth. Never use glass cleaner,
automobile or industrial shiner,
abrasives, wax, benzene, or
alcohol as these can damage the
projector.
- This can result in fire, electric
shock or cause damage to
the product (deformation and
corrosion).
•
Remove the plug from the outlet
before cleaning the product.
- Otherwise, this may result in
electric shock.
Others
WARNING
•
When you go out, place the
projector out of reach of
animals, and remove the power
plug from the wall outlet.
- Using a damaged power cord
may result in short circuit
or fire.
•
Do not use the projector near
highprecision electronic devices
or those that transmit weak
radio signals.
- This may affect the operation
of the product, causing an
accident.
•
Only a qualified technician
can disassemble or modify
the projector. For diagnosis,
adjustment, or repair, contact
your seller or our service centre.
- This may result in fire or
electric shock.
•
Do not stare directly into lens
when in operation, eye damage
can occur.
•
No user serviceable parts
inside unit. High voltage parts
can cause shock and even
electrocution.
•
Proper ventilation required, do
not block airflow around unit.
Doing so can cause injury and
internal overheating.