Advertisement
For Sony cameras, the function dial acts as the following table shows.
Setting
1.
Please refer to your camera manual instruction to turn on Remote Control
Function, different cameras may varies.
2.
Aim the remote control at the infrared receiver on the camera (usually within +/- 20 degree of the
lens axis, from the left to the right and from the top to the bottom), when using the remote outdoors,
make sure that the subject is not backlit and that the line of site between the remote and the infrared
receiver is not blocked by the lens or other obstacles.
3.
The function dial is default at OFF position when you insert a new battery into UR-262 the first time,
please press the function selector to move the function dial to the function you want to use.
Function Dial
REC
OFF
Function
Instant shutter release
Delay shutter release
Video recording
Infrared Function OFF
/Infrared Remote
Advertisement
