Kiwi UR-262 Aoraki Instruction Manual page 5

Use UR-262 as Infrared Remote
UR-262 has built-in infrared code for Canon,Nikon,Pentax,Sony cameras. The function mode dial for this
four brands cameras is different. Please refer to following instruction for use.
Infrared Function Description

For Canon cameras, the function dial acts as the following table shows.
For Nikon cameras, the function dial acts as the following table shows.
For Pentax cameras, the function dial acts as the following table shows.
NOTE:
*T/W function is not compatible with DSLR or SLR Cameras. Since the focal length of these
cameras' lens need to be manually adjusted.
*Fn function is only compatible with those Pentax cameras have video recording function and
infrared receiver at the same time.
Function Dial
OFF
Function Dial
OFF
Function Dial
T/W
Fn
OFF
Function
Instant shutter release
Delay shutter release
Infrared Function OFF
Function
Instant shutter release
Infrared Function OFF
Function
Instant shutter release
Transform between Telephoto
and Wide angle
Video recording
Infrared Function OFF