Switching On; Selecting A Programme; Starting The Programme; Standby - Miele G 4170 SCVI Operating Instructions Manual

Switching on

^ Open the stopcock, if it is closed.
^ Open the door.
^ Make sure the spray arms are not
obstructed.
^ Switch the dishwasher on with the On
button U .
The U indicator light comes on.

Selecting a programme

Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.

Starting the programme

^ Select the programme required with
the YX button.
The indicator light next to the selected
programme will come on.
^ Start the programme by closing the
door.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.

Standby

To save energy, the dishwasher will
switch to Standby mode a few minutes
after the last time a button has been
pressed or a few minutes after the end
of the programme. The indicators will
go out and only the On U indicator light
will be on.
^ To switch the indicators back on
again, press the YX button. This will
switch off Standby.
The dishwasher will not switch into
Standby mode whilst a programme
is running, if salt or rinse aid needs
to be replenished or there is a fault.
Operation
31