Sony HT-DDW1500 Operating Instructions Manual page 15

Installing the speakers on the
wall
You can install your surround and surround
back speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the metal
hook on the back of each
speaker as shown in the
illustrations below.
more than 25 mm
4.6 mm
10 mm
Metal hook on the back of the speaker
2
Fasten the screws to the wall.
The screws should protrude 5
to 7 mm.
5 to 7 mm
more than 4 mm
3
Hang the speakers on the
screws.
Metal hook on the back of the speaker
Notes
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
4.6 mm
10 mm
15
GB