Sony HT-DDW1500 Operating Instructions Manual page 12

Name Function
N AMP MENU
Press to display the menu of
the receiver. Then, use the
control buttons to perform
menu operations.
O AUTO CAL
Press to activate the Auto
Calibration function.
P WIDE
Press ALT (H) and then press
WIDE to select the wide
picture mode.
a)
Q TV CH +
/– Press to select preset TV
channels.
R TV VOL
Press to adjust the TV volume
a)
+ /– level.
S RETURN/
Press to
EXIT O
– return to the previous menu.
– exit the menu while the
T DISPLAY
Press to select information
displayed on the TV screen of
the TV, VCR, VCD player,
LD player, DVD player, CD
player, MD deck, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner.
U Control
After pressing AMP MENU
buttons
(N), TOP MENU/GUIDE
(V), or AV MENU (W),
press the control button V, v,
B or b to select the settings.
When you press TOP MENU/
GUIDE or AV MENU, press
the control button to enter the
selection.
V TOP MENU/
Press to display
GUIDE
– DVD title.
– menu or on-screen guide of
Then, use the control buttons
to perform menu operations.
12 GB
menu or on-screen guide of
the VCD player, LD player,
DVD player, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner is
displayed on the TV screen.
the satellite tuner, Blu-ray
disc recorder, hard disc
recorder, or PSX on the TV
screen.
Name Function
W AV MENU
Press to display the menus of
the VCR, DVD player,
satellite tuner, Blu-ray disc
recorder, hard disc recorder,
or PSX on the TV screen.
Then, use the control buttons
to perform menu operations.
a)
X H
Press to start playback of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX.
Y X
Press to pause playback or
recording of the VCR, CD
player, VCD player, LD
player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX. (Also
starts recording with
components in recording
standby.)
Z m/M
Press to
– search tracks in the forward/
– fastforward/rewind of the
D. TUNING Press to enter direct tuning
mode.
ANT Press ALT (H) and then press
ANT to select the signal
output from the antenna
terminal of the VCR or
satellite tuner (TV signal or
video signal).
CLEAR Press ALT (H) and then press
CLEAR to
– clear a mistake when you
– return to continuous
backward direction of the
CD player, VCD player, LD
player, DVD player, MD
deck, Blu-ray disc recorder,
hard disc recorder, or PSX.
VCR, DAT deck, or tape
deck.
press the incorrect numeric
button.
playback, etc. of the CD
player, DVD player, Blu-ray
disc recorder, PSX, or
satellite tuner.