Measurement Units; Set Language - AcuRite 01525 Instruction Manual

Select Measurement Units
To select between standard units (mph, ºF, etc.) or
metric units (kph, ºC, etc.):
1. Press the up or down arrow buttons until "SET
UNITS?" is displayed on the Selectable Category
part of the display unit.
2. Press the "
3. Press the up or down arrows to select "STAND"
for standard or "METRIC" for metric units.
4. Press the " " button to confirm your selection.
5. Next, you will see "WIND MPH". Press the up
or down arrows to select MPH, KPH, or KNOTS
for wind speed units.
6. Press the " " button to confirm your selection.
Units are now set.

Set Language

To select between English (default) or Spanish for the display unit language:
1. Press the up or down arrow buttons until "SET LANG?" is displayed on the
Selectable Category part of the display unit.
2. Press the "
3. Press the up or down arrows to select the desired language.
4. Press the "
Language is now set.
Note: Display unit reverts to English language when display unit runs out of
power or is reset.
" button to set the unit preference.
" button to set the language preference.
" button to confirm your selection.
10