Professional wireless weather station with wind and rain (10 pages)
Summary of Contents for AcuRite 1502RX
Page 1
Display for 5-in-1 Weather Sensor model 1502RX Package Contents 1. Display unit with tabletop stand 2. Instruction Manual This product requires an AcuRite 5-in-1 Weather Sensor (sold separately) to be operational. IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE...
Page 3
1. Peak Wind Speed 21. Record Low Highest speed from past 60 minutes. Shown for current category selected on the display (#17). 2. Wind Speed Alarm On Indicator 22. “CLEAR” Button 3. Average Wind Speed Deletes record low (#21) shown. of all speeds from past 2 minutes.
Back of Display Unit BACK OF DISPLAY UNIT 1. Integrated Hang Hole 4. Clear All for easy wall mounting. Clears all data recorded. 2. A-B-C Switch 5. Reset ID code that must match 5-in-1 Full reset to factory defaults. sensor’s A-B-C switch to ensure 6.
Display Unit Setup Set the A-B-C Switch Install or Replace Backup Batteries The A-B-C switch is located inside the battery compartment. It can Insert 3 x AA alkaline batteries be set to A, B or C. However, into the battery compartment, you must select the same letter as shown.
Set the Time & Date The clock and calendar are utilized to time stamp history records and other data, so it is important to set the time and date soon after you power on the display unit. Set the Time 1.
Page 7
” button to confirm your selection. Units are now set. Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product.
Weather Forecast AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy - personalized for your exact location.
Page 9
Set a Weather Alarm 1. Choose the weather category for which you wish to set an alarm by pressing the up or down arrow buttons until the category is displayed on the Selectable Category part of the display unit. 2. To program a value (only applies to alarms that require a value), press AND HOLD the “...
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Calibration Calibrate Temperature & Humidity The indoor / outdoor temperature and humidity readings can be calibrated on the display unit to improve accuracy.
If your AcuRite product does not operate properly, visit www.AcuRite.com or call (877) 221-1252 for assistance. For more information, visit our Knowledge Base at http://www.AcuRite.com/kbase FCC Information This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation.