Table of Contents
Advertisement
a. Disconnect the I/O panel connector cable from the system board.
b. Lift and remove the I/O panel from the computer.
Installing the I/O Panel
1.
Insert the I/O panel into the slot on the computer chassis.
2.
Connect the I/O panel cable to the system board.
3.
Install the:
a. fan.
b.
heat
sink.
c.
WLAN
card.
d. battery.
e.
back
cover.
4.
Follow the procedure in
Removing the Power Connector
1.
Follow the procedure in
2.
Remove the:
a.
back
cover.
b. battery.
c.
heat
sink.
d.
WLAN
card.
e.
display
assembly.
3.
To remove the DC-in connector:
a. Disconnect the DC-in connector cable from the system board.
b. Lift the DC-in connector from the computer.
After Working Inside Your
Before Working Inside Your
computer.
Computer.
19
Hide quick links:
Advertisement
Table of Contents
