Additional Safety Information; Quick Start Guide - Motorola MOTOPURE H12 Quick Start Manual

STORING YOUR
HEADSET
The charging case, desktop stand, and shirt clip
are designed to store your headset. When not
using your headset, use one of the accessories
for storing convenience:
●
The charging case is designed for portability
and protection. Place the charging case's
cover on the case to protect in a pocket or
bag. Snap the cover underneath and place
in a cup holder for in-vehicle use.
● The desktop charger displays your headset
for easy access at home or the office.
● The shirt clip secures your headset for
access on-the-go. The clip can be attached
to a shirt, bag, or purse strap.
Features and
Functions Guide
IMPORTANT:
Be sure to first follow the

Quick Start Guide

on the reverse side
of this guide
to complete initial setup
of your H12.
ADDITIONAL SAFETY
INFORMATION
Along with instructions in the Safety and Legal
Information pamphlet, please note the following
additional safety instructions.
● Do not store or use headset in temperatures
lower than -10ºC / 14ºF or higher than 50ºC /
122ºF .
Do not recharge headset in temperatures
●
lower than 0ºC / 32ºF or higher than 40ºC /
104ºF .
Conditions inside a parked car can exceed
●
this temperature range. Do not store headset
in a parked car.
Do not store headset in direct sunlight.
●
Storing headset fully charged in high
●
temperature conditions may permanently
reduce the life of the internal battery.
Battery life may temporarily shorten in
●
low-temperature conditions.
TURNING H12
ON AND OFF
To turn ON your H12, slide the Power
switch towards the power symbol, as
shown below. The indicator light first flashes
blue for several seconds, then:
flashes blue (if paired and connected with
●
another device).
becomes steadily blue (if ready to be
●
paired).
To turn OFF your H12, slide the Power
switch off. The indicator light will turn off.
Power
Switch
Indicator
Light