Start-up the camera reading system
Mains operation
Check if the power adapter is connected to the mains and the power supply socket
(12V DC) of the topolino smart.
Power on
Press the on/off button to switch on the device. When the topolino smart and the
baseplate is illuminated, you can put a page or an object onto the table.
All the optional settings – for example zoom, colour or brightness- can be adjusted
individually.
Power off
Switch off the device with the on/ off button.
Automatic save regulation for the device set-up
When you reset the device all settings used before will be activated again.
Replacement of lighting
The electronic magnifier is equipped with a high power LED Illumination.
If replacement of the lamp is required it should only be done by a specialist or by
Reinecker Vision GmbH.
Automatic switching from mains operation to
rechargeable battery operation
As soon as topolino smart is plugged into the electrical outlet, the system switches
automatically to electrical power operation even if it had been operating on the battery.
Important note
Please only use the power supply included in the delivery. Use of any other
power supply will void the warranty!
16