Summary of Contents for Reinecker topolino smart
-
Page 1: User Manual
User manual topolino smart Please read this user manual carefully prior to installation, use and maintenance for your own safety and in order to avoid damages on your system. -
Page 4: Table Of Contents
Disposal of the unit according to EU directive 2002/96/EEC ........8 Power supply .......................8 Safety instructions ......................9 II. Instructions for the camera reading system topolino smart ......10 Scope of delivery .......................10 Accessories (as an option) ..................10 Setting up of the system....................10 Connection of unit .....................12... - Page 5 Using the camera with a CRT or TFT screen ............19 Using the camera system on a computer or notebook ..........19 Connecting topolino smart to a computer ............19 Installation of the software on a PC or notebook ..........20 Operating of the system through the topolino-software ........24 Description of the software- menu bar ...............24...
-
Page 6: General Information
Product description topolino smart is an opto-electronic camera reading system, which magnifies text and pictures. It may be used permanently for private and professional appliance. The text or pictures are being captured by the integrated camera and then displayed on a directly connected VGA, desktop, or notebook monitor. -
Page 7: Medical Device
Safety advice topolino smart has to be installed in closed and dry rooms only. Do not plug topolino smart into an electrical circuit that is also being used for any life sustaining or support systems. -
Page 8: Cleaning Of The System
● Relative air humidity 30% to 80% Disposal of the unit according to EU directive 2002/96/EEC topolino smart contains of electronic components. In order to avoid damage to the environment, the country-specific rules have to be respected. Power supply Only use the original power supply which is included in the delivery by Reinecker Vision GmbH. -
Page 9: Safety Instructions
2. Do not touch the AC adapter with wet hands. 3. Only use the original power supply which is included in the delivery by Reinecker Vision GmbH. The use of any other equipment might lead to a product damage. -
Page 10: Instructions For The Camera Reading System Topolino Smart
Your system will normally be unpacked and set up by the supplier’s representative. If you have not purchased a Videomatic stand that fits to the product you must provide a solid surface for the system with sufficient surface area. Set up your topolino smart as described below: LED Light Control panel... - Page 11 LED lights are pointing down towards the table. At the hinge by the rectangular camera head, bring the camera into the upright posi- tion. Then twist the camera so that the hinge and the Reinecker logo are facing the user.
-
Page 12: Connection Of Unit
If you wish to connect your topolino to a VGA monitor, use your own VGA connect- • Steckernetzgerät in eine dem Stand der Technik entsprechende Schuko- oder ing cable and plug it into the back of the base of the topolino smart, in the socket Eurosteckdose stecken labelled VGA OUT. Then plug the other end into your own VGA monitor. -
Page 13: Description Of The Operating-Elements
Description of the operating-elements Control panel - top side of the device Brightness By pressing the up and down Brightness keys, you control the brightness of the image (intensity of the illumination). If both keys are pressed simultaneously in the distance viewing mode, the auto-exposure can be switched on/off: Auto-Exposure on: depending on the current lighting conditions, the brightness of the camera-image will be adjusted automatically. -
Page 14: Colour Mode
Switches the system on and off. Saving of the adjustments last used When turning on topolino smart, you will automatically revert to the last used colour and magnification settings. Topolino smart saves two different settings for the reading and distance viewing modes. -
Page 15: Control Elements On The Top Of The Camera Block
Control elements on the top of the camera block Autofocus (AF) By using the Autofocus key, autofocus can be turned ON or OFF. The status of the autofocus function is displayed for approximately 4 seconds at the bottom of the screen. -
Page 16: Start-Up The Camera Reading System
(12V DC) of the topolino smart. Power on Press the on/off button to switch on the device. When the topolino smart and the baseplate is illuminated, you can put a page or an object onto the table. All the optional settings – for example zoom, colour or brightness- can be adjusted individually. -
Page 17: Handling The Rechargeable Battery
The battery is only fully charged once the yellow charging light turns off. ● If topolino smart will not be used for a long time, please charge the battery completely. Even if switched off, topolino smart may discharge. Total discharge might damage the battery. -
Page 18: Switching From Reading To Distance Mode
Switching from reading to distance mode Position reading camera Pivot the camera head so that zoom buttons are facing up and the Reinecker logo and the camera hinge are facing the user. This will allow you to read any material which you place under the camera. -
Page 19: Using The Camera With A Crt Or Tft Screen
● On your computer, go to „Start\Program\topolino“ to start up the topolino-software. You must turn on your topolino smart before starting the software on your computer. Now you may view your magnified reading material on the computer monitor and operate the system either using the keys on the topolino device itself or using the... -
Page 20: Installation Of The Software On A Pc Or Notebook
Installation of the software on a PC or notebook To install the software on your PC or notebook, place the included CD into your computer‘s CD drive. In case the CD does not start automatically, go to your desktop folder and select your CD drive to start “setup.exe”. - Page 21 In the next window create the directory where you want to save the program. By default, the directory “C:\Program Files\topolino” will be set up. However, if you wish to install the software into another folder, please click “search” and pick a directory of your choice.
- Page 22 In the next window, you are given the option to record video sequences. To activate this function, select “activate”. To continue installation, click the „continue“ key. During the next step the name of the start menu folder under Windows XP will be assigned.
- Page 23 Click the „continue“ key in order to go to the next step. Finally finish the installation wizard by clicking “finish”. Installation of your topolino-software is now completed and the program can be started and accessed through your window menu bar „Start\Programme\topolino“.
-
Page 24: Operating Of The System Through The Topolino-Software
Operating of the system through the topolino-software Description of the software- menu bar File Save Image: With this menu item, the image currently displayed on the monitor can be saved as an image file. These images may be saved in the default directory or in any folder of your choice. - Page 25 Camera Mode: This function is deactivated, as the switching between reading and distance viewing mode by topolino smart automatically takes place when the camera position changes. Ruler/Mask: With this Ruler/ Mask button, you can turn on and off both “window marking”...
-
Page 26: Description Of The Toolbar
Image Scale1:1, adapting to fit the size of the window, adapting to the dimen- sions of the window: Use this menu item the frame mode on the monitor can indi- vidually be adjusted. Language: Use this menu item to select between English, German, French and Dutch as the language for all software menu items. -
Page 27: Technical Data
Camera modes: This function is deactivated, as the switching between read- ing and distance viewing mode by topolino smart automatically takes place when the camera position changes. Ruler-/Masks-Mode switch: Activate and then switch between the options, vertical ruler, horizontal ruler, vertical line coverage and horizontal line cover- age. -
Page 28: Warranty Information
Warranty Information 1. Reinecker Vision GmbH grants a warranty of 24 months (warranty period only valid within the European Union) against defects in manufacture counted from date of invoice ex Reinecker Vision GmbH. 2. All parts that have been replaced when repairing the unit will automatically become property of Reinecker Vision GmbH. -
Page 29: Notes
Notes... - Page 31 Typ: topolino smart Serial-Number: Manufacturer: Reinecker Vision GmbH Final examination: Power supply : 100 - 240VAC 50/60 Hz By using the power supply : 12V DC 2,5 A Type: FW7362M/12 Power consumption : max. 20 Watt...
- Page 32 Reinecker Vision GmbH In case service is International Contact necessary, please contact your authorized sales department, customer relations: distributor. Sandwiesenstraße 19 DE-64665 Alsbach-Hähnlein customer service: Erlenweg 3 DE-64665 Alsbach-Hähnlein Tel.: +49 62 57-93 11-0 Fax: +49 62 57-93 11-8230 Email: info@reineckervision.com www.reineckervision.com...